1. In the loop control, the process mathematical model is built by physicochemical research in production process.
根据对生产工艺的分析，完成了对生产线的逻辑控制系统。
2. Using mathematical methods studied wet oxidation catalyst butyric acid degradation reaction is in the process of TOC changes.
采用数学方法研究了催化湿法氧化降解正丁酸反应过程中的TOC变化。
3. This paper put forward the reasonable mathematical formula which simulate refered physics phenoma, develop mathematical model and develop computer program, show the burden flow trajectory, the formation process of burden layer, the ratio of ore to coke, radial distribution of size, radial distribution of gas flow velocity and establish the burden distribution mathematical model of bell top blast furnace on the basis of analyzing the basic factors and combine the real condition of bell-movable armor blast furnace.
本论文在对这些影响因素进行分析的基础上，结合带可调炉喉导料板双钟四阀高炉的实际情形，提出模拟这些物理现象的合理的数学表达式，开发数学模型及编写计算机程序，动态显示料流轨迹、料面的形成过程、矿焦比分布、粒度径向分布、径向气流速度比分布，建立钟式高炉炉料分布数学模型。
4. You have a strong ability to process visual-spatial and mathematical information and this, combined with your logical mind, means you are a Visual Mathematician.
你具有很强的视觉空间和数字信息处理加工能力，加之你的逻辑化头脑，这意味着你是一个视觉数学家。
5. mathematical process的反义词
5. Based on model of top-blown oxygen in converter for plain carbon steel melting and model of AOD process for stainless steel melting, a mathematical modeling of a 80 t K-OBM-S converter for steelmaking of stainless steel has been established.
以转炉冶炼普碳钢的顶吹模型和AOD法冶炼不锈钢模型为基础，建立了适用于80 t K-OBM-S转炉冶炼不锈钢的数学模型。
6. Using the similarity principle, the jet velocity distribution of oxygen gun was investigated in the process of the oxygen top-blown autothermic smelting nickel-copper concentrate, and its mathematical model was established.
运用相似模化理论，研究了氧气顶吹自热熔炼炉氧枪射流速度分布规律，并建立了相应的数学模型。
7. mathematical process的意思
7. A mathematical model is established with an aim of studying the cooling process for green carbon anodes.
通过数学模型描述炭阳极生坯冷却过程，研究炭阳极冷却温度与冷却时间、冷却水温及成型温度间的关系。
8. A mathematical model that describes the transient flow is developed based on the conservation law of mass momentum and energy followed in the course of transient flow process of gasliquid phases.
根据气液瞬变流动过程中所遵循的质量、动量和能量守恒定律，建立了描述气液两相瞬变流动的数学模型。
9. Its process mathematical description is illustrated through a typical binary distillation column design. Then the framework and strategy of solving the optimal design and control, which involve the solution of mixed integer dynamic optimization, are presented.
以典型二元精馏塔设计为例阐述了其过程系统的数学描述，给出其最优工艺设计和控制设计的求解框架和求解策略，以及其中混合整数动态优化问题的求解方法。
10. mathematical process
10. In this paper, analytic hierarchy process to the football team has established a ranking of the mathematical model, which can be dependent on the availability of data to estimate the rank is given.
详细说明：本文用层次分析法建立了一个给足球队排名次的数学模型，它能够对数据的可依赖程度作出估计并给出名次。
11. danci.edu.pub
11. The process of constructing the mathematical model of blade surface for 3D impeller with NURBS algorithm, and the tool path calculation method for numerical-controlled machining technology of its profiling mould are introduced.
简介了运用非均匀有理 B样条数学方法对三元叶轮的叶片建立叶片曲面数学模型的过程，及其叶片压型模具数控加工的刀位轨迹实用算法。
12. The kinetics of hexachloroethane dissolution into surfactant solution was studied and a mathematical model describing the mass transfer process was developed.
为了解表面活性剂溶液对憎水性污染物增溶过程的影响因素，研究六氯乙烷在Tween20溶液中的增溶动力学过程，建立了六氯乙烷在表面活性剂溶液中增溶的传质模型。
13. The regulation mechanism of T cells in the process of immune response and the mathematical model of immune regulation are analyzed.
分析了生物系统的免疫应答过程中T细胞的调节机制，和免疫应答的数学模型。
14. On the basis of the fundamental equations of the sturry waterhammer transient process, a mathematical model for the process of the pseudohomogeneous airentrained slurry waterhanvmer at the pump stopping was proposed using the characteristic line method.
在浆体水击瞬变过程基本方程的基础上，运用特征线方法建立了考虑含气量的伪均质浆体停泵水击瞬变过程数学模型。
15. The mass transfer process in the reciprocating sieve plate extraction column was studied. Based on the single droplet mass transfer model, the scale-up model of RPEC was established with mathematical statistics. In this model, flux, tray spacing, amplitude and frequency should be kept invariable when H (apparent height of a transfer unit) was calculated. In a RPEC of diameter 100 mm, the experiment was carried out with lincomycin-n-butanol-acid water.
对往复振动筛板萃取塔塔内的传质过程进行了理论分析，并在此基础上，从单液滴传质模型出发，应用数学统计方法建立了RPEC放大设计模型，即进行放大设计时应遵循通量、塔板间距、振幅和频率不变的原则计算表观传质单元高度H。
16. Beginning with the discussion on the relationships between strength, angular rigidity and stability, the conventional theory and methods of stability analysis are recalled in this paper, such subjects as characters of stability problems, meaning of critical forces, relationship between two sorts of stability problems are studied, the insufficiency of the comprehension and therefore flaws of methods in this field are pointed out, reasonable mechanical logic and mathematical process of applied stability analysis is setup.
从强度、刚度和稳定的关系讨论着手，在对传统稳定分析理论和方法体系的梳理中，通过对稳定问题的性质、临界力的意义、两类稳定问题的关系等问题的探讨，剖析了目前对于稳定问题认识上的不足及其带来的方法上的缺陷，建立了实用稳定分析的合理的力学逻辑层次和数学表述形式。
17. mathematical process的近义词
17. Dehydration process based on hollow fiber composite membrane is one of the crucial and effective methods to remove water vapor from industrial gases such as light hydrocarbon, compressed air, natural gas and so on. Dehydration of propylene with VP method was studied in the thesis. We prepared the PVA/PS、CS/PS and PVA-CS/PS hollow fiber composite membranes by spread method. The permeation behavior of water vapor among coagulable light hydrocarbons through composite membranes and asymmetric membrane was researched by vapor permeation method. Also a differential mathematical model was established which can describe dehydration of gas phase propylene.
本论文以采用蒸气渗透法脱除丙烯中微量水分为目标，制备了 PVA/PS、CS/PS、PVA-CS/PS 中空纤维复合膜；研究了可凝性轻烃蒸气中的微量水分在复合膜、非对称膜中的渗透行为，建立了描述丙烯气相脱水的数学模型，并进行了模拟计算；深入探讨了水蒸气在交联 PVA 致密膜中的渗透机理。
18. Dehydration process based on hollow fiber composite membrane is one of thecrucial and effective methods to remove water vapor from industrial gases such aslight hydrocarbon, compressed air, natural gas and so on. Dehydration of propylenewith VP method was studied in the thesis. We prepared the PVA/PS、CS/PS andPVA-CS/PS hollow fiber composite membranes by spread method. The permeationbehavior of water vapor among coagulable light hydrocarbons through compositemembranes and asymmetric membrane was researched by vapor permeation method. Also a differential mathematical model was established which can describedehydration of gas phase propylene.
本论文以采用蒸气渗透法脱除丙烯中微量水分为目标，制备了 PVA/PS、CS/PS、PVA-CS/PS 中空纤维复合膜；研究了可凝性轻烃蒸气中的微量水分在复合膜、非对称膜中的渗透行为，建立了描述丙烯气相脱水的数学模型，并进行了模拟计算；深入探讨了水蒸气在交联 PVA 致密膜中的渗透机理。
19. The program is a simulation algorithm is a simple mathematical formula for the solution to achieve process.
该程序是一个模拟算法程序，是对一个简单的数学公式的求解实现过程。
20. It has been widely used in industrial process control; Fuzzy control rely on the process of mathematical precision object model not so much, and is robust, fast system response characteristics, through membership function to the design of fuzzy controller, it applied to main steam temperature object. The use of genetic algorithms for PI regulator parameters feasible solution in the region can find an optimal overall optimization program. Above the control algorithm for the main steam temperature object, and wo used the Matlab software for simulation. The results show: the three control algorithm presented in this paper has its own advantages, their combined use could have good control over quality and robustness, with a strong anti-jamming capability. There are broad prospects for development.
串级控制根据主副回路的特点，可以有效的克服二次扰动，易于控制整定参数，从而被广泛地应用于工业过程控制；模糊控制可以不过分依赖过程对象的精确数学模型，而且具有鲁棒性高、系统响应快的特点，通过隶属函数来设计模糊控制器，并应用于主汽温对象；利用遗传算法对 PI 调节器参数在可行解区域内找到一个全局最优方案进行寻优，将上述控制算法用于某主汽温对象，并用 Matlab 软件进行仿真，结果表明，该文提出的三种控制算法都有其各自的优点，将它们结合起来使用，具有较好的控制品质和鲁棒性，且有较强的抗干扰能力，具有广阔的发展前景。