1. electrical capacity是什么意思

1. this paper develops a new type of on large battery capacity real-time detection technology. ATMEGA8L as the core of ampere2hour meter with the input signal at ±100mV and the measurement of electrical isolation. Using the least-squares algorithm identify the system`s model with the MCU code rarely achieved the least-squares algorithm. Analysis of the test results shows reliable performance, high precision.
    针对大型蓄电池存储容量在线实时检测技术难题，采用高档AVR单片机ATMEGA8L为核心，设计了输入信号±100mV、测量端与测试系统间电气全隔离的安时计，采用了最小二乘算法对系统误差进行了校正，辨识出了精确的系统模型，以很少的单片机代码量实现了最小二乘算法。

2. The Second Hydro-electrical Power Station of Jin Ping, which is 4800MW-installed capacity, is planned to adopt the form of the underground factory building, which is formed by two large cavities.
    锦屏二级水电站拟装机容量4800MW，采用地下厂房的布置形式，是以主厂房344.4m×25.8m×68.7m(含副厂房及装配场和主变室(314.95m×19.8m×33.0m)为主体的洞室群，厂房长轴按N35°E平行布置。

3. Not only can it possess the dynamic and static speed regulating performances as the same as the direct current electromotor, but also have the advantages such as avoiding the limitation of electrical brush structure, a smaller capacity, a higher efficiency and easy to control.
    BLDCM不仅保持了直流电动机的动静态调速性能，而且避免了有刷结构带来的固有缺陷，具有体积小、效率高、控制简单等优点。

4. First, the main technical parameters 1, a single strand of copper in diameter φ1.2 - 5.0mm Al φ1.8-- 5.0mm 2, the largest cross-section Stranded Copper 800mm2 Al 1000mm23, the highest speed cage twist: 6178 rpm file a total of six speed 12158 r. p. m a total of six-speed file 18136 r. p. m a total of six-speed file 24115 r. p. m a total of six-speed file 3098 r. p. m a total of six-speed file 4, Stranded pitch: 40-1400mm 5, to pitch spiral 520-25006, line speed traction: 16-62m/min 7, the main electrical power: 185 KW 8, within the framework of the actinomycetes set specifications: PND 6309, standard traction round: 2 ×φ2500mm 10, set-up specifications: PN1600 - PN315011, the total weight of equipment: 105 t 12, with a total installed capacity of power; 250 kW Second, the major equipment
    一、主要技术参数1、绞合单线直径铜φ1.2--5.0mm 铝φ1.8-- 5.0mm2、绞合最大截面铜 800mm2 铝 1000mm2 3、绞笼最高转速：6盘 178 r.p.m 共六档变速12盘 158 r.p.m 共六档变速 18盘 136 r.p.m 共六档变速 24盘 115 r.p.m 共六档变速 30盘 98 r.p.m 共六档变速4、绞合节距：40–1400mm 5、予螺旋节距 520–25006、牵引线速度：16–62m/min7、主电机功率：185 KW8、框架内放线盘规格：PND 6309、牵引轮规格：2×φ2500mm10、收线盘规格：PN1600 – PN315011、设备总重量：105 t12、总装机功率； 250 kW二、设备主要组成部件：1、φ 630端轴式放线装置 1套2、6、12、18、24、30盘绞笼体(90盘)共5套3、6、12、18、24、30盘集中上盘装置共5套4、并线模架及紧压架(12、18、24、30为予螺旋装置) 5套5、计米器 1套6、主牙箱及36级传动牙箱 1套7、2×φ2500牵引装置 1套8、φ3150 收排线装置 1套9、予成形装置 1套10、电控箱及操作台 1套11、安全防护门 1套

5. At present, annual production of enamelled copper round wire and bare copper wire capacity of 8000 tons, the product including QZ, QA, QZY models such as enamelled copper round wire, T, TY models of soft-state and Hard bare copper wire, diameter ranging from production 0.035~3.00 mm; at the same time as the electrical wire industry design and manufacture of various types of wire drawing machine, enamelled units and other special machinery and equipment.
    目前公司年生产漆包铜圆线和裸铜线能力达到8000吨，产品包括QZ、QA、QZY等型号漆包铜圆线，T、TY型号的软态和硬态裸铜线，生产线径范围从Φ0.035~3.00㎜；同时为电工线材行业设计制造各类型拉丝机、漆包机组等专用机械设备。

6. Built Thai Fung Industrial Park, invested nearly 500 million yuan, the park construction area of nearly 100, 000 square meters, with China''s largest manufacturing base of Dianshui Hu, the annual production capacity of nearly 20 million units annual production capacity of nearly Induction Cooker 10 million; Juicers, Zhu Dan-quality household electrical appliances, and other health production capacity nearly 60 million Taiwan.
    2005年建成龙的泰丰工业园，投资近5亿元，园区建筑面积近10万平方米，拥有中国最大的电水壶制造基地之一，年生产能力近2000万台；电磁炉年生产能力近1000万台；榨汁机、煮蛋器等其他精品家电产品生生产能力近6000万台。

7. Shanghai Yi-wide Electrical and Mechanical Co., Ltd. was established in November 2006, is headquartered in Taiwan has 20 years of technology and experience, research and development, production capacity, is designeddrill grinding machine, to obtain multi-national patent, the accuracy of 0.01mm deep clients trust and support of Product: You can twist drill grinding general head, deep-hole drilling, fast drilling, L-drilling, three slant drilling, sheet metal drilling, Endmill... for the domestic market to provide high-quality products, high rates of economic opportunities, sincere invite you to become our distribution partners, the opportunity only left to know how to grasp the business opportunities you!!
    上海全镒机电有限公司设立於2006年11月，总公司位於台湾有20年的技术及经验，具研发、生产的能力，现专営钻头研磨机，取得多国专利，精度0.01mm深获客户信赖与支持，产品：可研磨一般麻花钻头、深孔钻、快速钻、左旋钻、三斜面钻、薄板钻、立铣刀。。。，为国内市场提供高品质产品、高经济商机，诚挚邀请您成为我们的经销合作伙伴，机会只留给懂得掌握商机的您！！

8. After equipment update, technology improvement, expansion of productive capacity, research and development in past over twenty years, now our company has becoming a professional manufacturer of kinds of tapes, such as stationery, packaging, industrial, protection, electrical, double-side and other special adhesive products, and has branch factories and representative offices in Thailand, Taiwan, Hong Kong etc.
    本公司自行研发生产台湾第一卷双面泡棉胶带及花艺胶带，历经20多年的不断设备更新，技术进步，产能扩充以及研发创新，目前已经发展成为生产文具，包装，工业，保护，电气，双面以及其他特殊胶带等百余类品种的专业生产厂家，并在泰，台，港等地设有生产实体。

9. Reactors with the same voltage level and same capacity, it iss smaller and lighter; the temperature rises small at rated load; the use of dry-type epoxy casting, high mechanical strength, good electrical insulation properties, beautiful and reliable
    同电压等级、同容量的电抗器其体积较小、重量较轻；在额定负载时温升小；采用干式环氧浇注，机械强度高，电气绝缘性能好，美观可靠。

10. Hangzhou Electric Co., Ltd.±After more than thirty years experience in electrical manufacturing, and has formed a more perfect production system, quality assurance system and sales service system; has passed ISO9001-2000 quality management system certification, CE certification and ROHS certification; have have to meet the needs of all types of users in the design and manufacture of motor level; has reached 500, 000 KW induction motor and 100, 000 KW of rare earth permanent magnet motor of an annual production capacity.
    杭州江潮电机有限公司经过三十余年的电机制造经验积累，已形成较为完善的生产制造体系、质量保证体系、销售服务体系；已通过ISO9001-2000质量管理体系认证、CE认证和ROHS认证；已具有能满足各类用户需求的电机设计和制造水平；已达到50万KW异步电机和10万KW稀土永磁电机的年生产能力。

11. The factory is specialized in producing all kinds of level of (general, high temperature, high pressure, anti-corrosion, explosion-proof, food-and-float, pressure-type, capacitive, electrode-, electricity-contact, ultrasonic- figures show that simulated Guangzhu -(Show accuracy of ± 1%, the alarm set point accuracy of the protection of ± 1%, single-loop, multi-loop show, 4~20 mA output flash Alarm (1-8 alarm, six voice alarm transmission temperature (Two-4~20 mA transmission proliferation of silicon micro-pressure transmitter (Two-4~20 mA transmission zirconia oxygen analyzer (plug-in, external, portable, integrated, 4~20 mA output Pump motor control cabinet (single capacity Pn ≤ 150 KW, boot, 丫-Δ conversion started, buck started, soft start, PLC communication link multi-loop level control system; high-rise building underground water pipe noise - Elimination System; electrical implementing agencies and servo amplifier.
      本厂是专业生产各种液位计(普通、高温、高压、防腐、防爆、食品型、浮球式、静压式、电容式、电极式、电接点式、超声波式)；数字模拟光柱显示仪(显示精度±1%、报警保护点的设定精度±1%，单回路、多回路显示，4～20mA输出)；闪光报警仪(一至八位报警、六位语音报警)；温度变送器(二线制4～20mA传输方式)；扩散硅微压力变送器(二线制4～20mA传输方式)；氧化锆氧量分析仪(插入式、外置式、便携式、一体式，4～20mA输出)；液泵电机控制柜(单机容量 Pn≤150KW、直接启动、丫-Δ转换启动、降压启动、软启动、PLC通讯联接)；多回路液位控制系统；高层建筑地下集水箱管道噪音消除系统；电动执行机构；以及伺服放大器。

12. Liuzhou some synthetic oilName: Lithium Grease, molybdenum disulfide, high temperature grease, high temperature electrical fat, kiln cars fat, high-temperature extrusion fat, Jinniu grease, fat-specific aluminum alloy, high temperature high fat, high-temperatureanti-stick agent, high temperature chain oil, high and low temperature bearing grease, aviation fat, lowering device fat, thimble fat, very low-temperature extreme pressure grease, high-low temperature grease, piston ring seal fat, calcium complex, lithium complex, aluminum composite, the damping oil, urea-based grease, oil roller, plastic gear grease, dust, grease, toys, fat, fat gyro motors, conductive grease, thermal conductivity Silicone Grease, anti - irradiated lipid, dimethyl silicone oil, health-grade silicone, high vacuum silicone oil viscosity standard oil, instrument oil, top oil, optical silicone damping oil, bearing oil, watches oil, fuse oil, rust-proof resin, cathode electrophoresis fat, fat loose screws, wire rope surface fat, Ma core fat, anti-rust oil, insulating resin 73, from the type agent, release agent, insulation resins, sealants, insulating oil, high-phenyl silicone oil, photocopiers oil, pump oil, thread grease, gear grease, bit grease, allow water-based grease, gear lubricant spray, turbine vortex rod oil, gear oil, gear oil capacity waterborne, rail oil, Silicone Grease, oil pump, turbo molecular pump oil, synthetic compressor oil, refrigeration oil, heat-conducting oil, hydraulic oil, hydraulic oil temperature, anti-burning hydraulic oil, cycle oil, gear oil, transmission fluid, damping fluid, body Annex fat, fat joints, antifreeze, dedicated reducer fat, calcium-based resin, white resin specialty, food grease, Vaseline, cream-filled cables, the spread of oil, softening oil, white oil, knitting oil, split seed oil, spindle oil, sparks oil, diesel oil, quenching oil, forming oils, ; Drawbead oil, cutting oil, aluminum rolling liquid, titanium cutting oil, oil tapping oil watchcase extrusion, die-casting pieces of cutting oils, stamping oils, shut up oil, Tensile oil, extreme pressure cutting oil, cutting oil, grinding oil, shaving arrow oil, volatile oil punching, multi-function processing oil, cable oil, ; nut processing oil, cutting oil, platen oil, cleaning agents, micro-emulsified oil, copper and aluminum microemulsifying oil, emulsified oil, emulsified oil cooling, multi-effect emulsification oil, water-based tensile oil, synthetic water-based cutting fluid, copper wire drawing oils, extreme pressure emulsified oil, anti-rust Emulsified oil, rolling oil emulsion, thread cutting oil, ; water-based cleaning agent, aqueous forming agents, mold release liquid aluminum alloy, magnesium alloy, such as mold release liquid.
      特士龙部分合成油品名称：锂基脂、二硫化钼、高温润滑脂、高温电机脂、窑车脂、高温挤压脂、金牛油脂、铝合金专用脂、高温高速脂、高温丝扣防粘滑剂、高温链条油、高低温轴承脂、航空脂、降器脂、顶针脂、极低温极压脂、高低温脂、活塞环密封脂、复合钙、复合锂、复合铝、阻尼油、脲基脂、轧辊油、塑胶齿轮脂、防尘脂、玩具脂、陀螺马达脂、导电脂、导热硅脂、抗辐照脂、二甲基硅油、卫生级硅油、高真空硅油、粘度标准油、仪表油、陀螺油、光学硅油、阻尼油、轴承油、手表油、引信油、防锈脂、阴极电泳脂、螺丝松动脂、钢丝绳表面脂、麻芯脂、防锈油、绝缘脂73、离型剂、脱模剂、绝缘树脂、密封剂、绝缘油、高苯基硅油、复印机油、电泵油、螺纹脂、齿轮脂、钻头脂、容水性润滑脂、齿轮喷雾润滑剂、涡轮涡杆油、齿轮油、容水性齿轮油、导轨油、硅脂、真空泵油、涡轮分子泵油、合成压缩机油、冷冻机油、导热油、液压油、宽温液压油、抗燃液压油、循环油、排档油、传动液、减震液、车身附件脂、万向节脂、防冻液、减速机专用脂、钙基脂、白色特种脂、食品脂、凡士林、电缆填充膏、扩散油、软化油、白油、针织机油、绽子油、主轴油、火花机油、柴油机油、淬火油、成型油、拉延油、切削油、铝轧制液、钛合金切削油、表壳挤压油攻牙油、压铸件切削油、冲压油、收口油、拉伸油、极压切削油、精密切削油、研磨油、剃矢油、挥发冲剪油、多功能加工油、拉线油、螺帽加工油、快削油、压板油、清洗剂、微乳化油、铜铝微乳化油、乳化油、冷却乳化油、多效乳化油、水性拉伸油、合成水性切削液、铜拉丝油、极压乳化油、防锈乳化油、轧制乳化油、线切割油、水性清洗剂、水性成型剂、铝合金脱模液、镁合金脱模液等。

13. Enterprises with advanced production equipment and advanced smelting technology, 8700 KV electric power supply capacity and dedicated lines, major equipment is 1250 KVA fused magnesia furnace 6, with an annual output of ordinary fire-resistant fused magnesium 10, 000 tons, with an annual output of electrical-power Melting 10, 000 tons of magnesium; A Electrotechnical production line-magnesium oxide powder 1, with an annual output of high, medium and low performance and different levels of magnesium oxide powder-class electrician 8, 000 tons; modified magnesia decorative plate production line one, decorative plates with an annual output of 350, 000 magnesia Zhang; re-erected burning kiln 2, with an annual output of heavy firing magnesia 30, 000 tons, with Japan Kurosaki Harima Co., Ltd.
      企业拥有先进的生产设备和先进的冶炼技术，有8700KV电容量及专用供电线路，主要设备有1250KVA电熔镁砂炉6座，年产普通耐火电熔镁1万吨，年产电工级电熔镁1万吨；有电工级氧化镁粉生产线1条，年产高、中、低等不同性能和级别的电工级氧化镁粉8000吨；有改性镁质装饰板生产线1条，年产镁质装饰板35万张；有重烧竖窑2座，年产重烧镁砂3万吨；与日本黑崎播磨株式会社合资喷补料生产线1条，年生产系列喷补料3.5万吨；企业有600平方米的质量监测楼，配备有先进的检测化验设备；企业拥有一批技术过硬、实践经验丰富的科研技术人才和监测化验人员，从而保证了产品的优质稳定。

14. All the main production mode power 1000KN - 5200KN high precision injection molding machine, the product of the mode-locking with a high rigidity body, configuration imported hydraulic and electrical original, using the first bi-metallic screw mixing, plasticizing capacity, and applicable to various engineering plastic injection molding and accepts the user''s special order.
      主要生产合模力 1000KN — 5200KN 高精密注塑机，产品具有高刚性的锁模机构，配置进口的液压和电气原件，采用混炼头双金属螺杆，塑化能力好，适用于各种工程塑料制品的注塑成型并可接受用户的特殊订货。

15. In order to solve the accurate positioning of electro-mechanical control of electrical actuator of large capacity, a new kind of design scheme is put forward here.
      为了解决电动机械控制中大功率执行机构的精确定位问题，提出一种新型电动执行机构的设计方案。

16. electrical capacity的近义词

16. Room for power distribution and electrical shaft distance, larger capacity equipment, fire power, the line can not be dark enough, you can take effective measures of fire within the ceiling laid.
      对于配电室与电气竖井距离较远，消防用电设备容量较大，线路无法暗敷的，可以在采取有效的防火措施后敷设在吊顶内。

17.

17. In electrical performance respect, it compares the discharge characteristic of 79%DOD in the middle of the 1st eclipse season with the 36th eclipse season, and outlines the temperature characteristic of the charge and discharge period and the relation between capacity and hydrogen pressure. Especially in life performance respect it emphasizes the EOD potential characteristic in simulated GEO, 79%DOD and the maximum DOD of 40 eclipse seasons, the capacity change and the EOD potential change of the 3rd and 36th eclipse season of the batteries.
      在电池组性能方面，比较了第1阴影期中间和第36阴影期中间79%DOD的放电特点，概要介绍了充放电温度特性，容量与氢压的变化关系；特别在寿命特性方面，着重阐述了电池组在模拟GEO，79%DOD下40个阴影期间最大放电深度时终止电压变化特性，电池组容量变化以及第3阴影期和第36阴影期放电终止电压变化情况。

18. Several kinds of electrical capacity coupling plasma-discharge apparatuses for induced-polymerization process had been designed to study the influence of structure parameters of the equipment on discharge performance.
      自制了用于引发聚合过程的电容耦合等离子体放电装置，通过对放电装置结构的研究发现，比较理想的结构参数为：反应室直径为70mm，反应室长度为31cm，两块电极的位置应尽可以靠近。

19. At present, production of electrical insulation board, annual production capacity of 20, 000 tons, 17 grams copy paper, the annual production capacity of 5, 000 tons.
      目前主要生产电工绝缘纸板，年生产能力2万吨，17克拷贝纸，年生产能力5000吨。

20. electrical capacity的解释

20. The project is planned to reclaim the waste heat of the high temperature exhaust gas from the existing ferroalloy electric heater, revolving furnace production line and the new added finery. About 18 units of waste heat boiler are needed for the project. The total production capacity of steam is 232t/h. The steam will be used for the steam turbine generators and boilers. Equipped with 2 sets of 12MW condensing steam turbine-generator unit and 8 units of 1500KW worm-expand power machine, the produced electrical energy will be used for the smeltery of Bayi Group Company.
      整个项目工程对主要是对现有铁合金电炉、回转炉生产线、新增精炼炉的高温废弃烟气进行余热回收，全部工程建设约18台余热锅炉，共能生产蒸汽232t/h，所生产出来的蒸汽供汽轮发电机和锅炉自用，配以2台12MW凝汽式汽轮发电机组和8台1500KW的螺杆膨胀动力机用来发电，所发的电能全部供八一集团公司冶炼厂使用。