1. Of course, with Fate Testarossa coming out of the winner''s bracket, she would have the advantage over Nagato Yuki whom would have to defeat Fate twice, and the challenge was too great to bear.
当然，与命运辆苔丝罗莎走出胜利者的支架，她就会有优势，Nagato你将失败的命运两次，和所面临的挑战是太大，无法承受。
2. Earlier in the A-bracket quarterfinals, Miller dispatched Sam Smith 4-2, Ted Banas clipped Davis Toothman 5-4, White out-pointed Carrie Halvorson 6-2, while Glass aced his match.
较早前在A -括弧内的四分之一决赛中，米勒派出萨姆史密斯4月2日，泰德banas撞上了戴维斯toothman 5月4日，白失控指出，卡丽halvorson 6月2日，而玻璃进洞比赛。
3.
3. Considering the vehicular SG cruise integrating model under braking condition influenced by some factors of nonlinearity, time-delay and the disturbance, a new nonlinear SMITH predictor is designed to compensate the time delays of control variable in advance. Furthermore, with the resort of pure delay operator, extension of the Lie derivative and the Lie bracket, some issues of SISO nonlinear system with time delays in state variable are resolved, which cover the input-output linearization, invertability of coordinate transformation and the disturbance decoupling problem. the staged transformation and design technique, the vehicle deceleration tracking control and the SG cruise disturbance decoupling control under braking condition are carried out effectively using proposed control method.
在建立制动工况下车辆走-停巡航系统集成模型基础上，针对其非线性、时滞特性以及目标车减速度干扰的影响，提出一种改进的非线性SMITH预估补偿方法，以消除控制变量时滞，并结合时滞算子、扩展李导数和扩展李括号方法，研究并解决了SISO状态变量时滞非线性系统的输入输出线性化、坐标变换的可逆性以及输出干扰解耦问题，实现了SISO时滞非线性系统的综合控制。
4. Finite element analysis of vacuum chuck brackets''strength was carried out on CAE module in UG. Subsequently, two plans were provided to improve the strength of vacuum haptor bracket. In terms of manufacturability and convenience of installation and maintenance, one reinforcing rib was chosen. Simultaneously wall thickness of vacuum chuck brackets was increased. After the new vacuum chuck bracket models were imported to ANSYS Workbench, modal analysis was carried on. The simulation result shows good kinetic characteristics of modified vacuum haptor bracket.
应用UG软件的CAE模块对自动抱夹横移机的吸盘支架进行强度有限元分析，提出两种提高吸盘支架强度的方案，从制造工艺性和安装维修方便性角度出发，选择增加一条加强筋，同时增加吸盘支架壁厚的方案，将新的吸盘支架模型导入ANSYS Workbench中进行模态分析，仿真结果表明改进后的吸盘支架具有良好的动力学特性。
5. 公共查询·英语单词大全
5. One of those young guns is seventeen-year-old John Morra who joins Edwin Montal way out on the end of the winners bracket.
一，这些年轻后生的是17岁高龄的约翰morra谁加入埃德温蒙塔尔的出路就结束，得奖者括弧内。
6. The only modification that was made in the in/out dimension was the addition of 0.5 of in/out in the upper second bicuspid bracket.
唯一的修改是在输入/输出方面是增加了0.5 /输出在上第二双尖牙支架。
7. An upper second bicuspid bracket with an additional.5 mm of in-out compensation is provided for the common situation in which upper second bicuspids are smaller than upper first bicuspids.
上第二双尖牙支架额外0.5毫米中的规定进行赔偿的共同情况，即第二bicuspids上小于上颌第一bicuspids 。
8. A small grease fitting allowed grease to be injected into the hubs, bottom bracket and headset, to flush out water.
小油脂装修让油脂被注入枢纽，中轴和耳机，冲洗出来的水。
9. When gauze of section of low Zhi Zhu of cotton of manufacturing pure continous, hemp, because raw yarn sheet is strong not tall, can twist with water on 1332M machine twist knot implement come contact, to assure contact quality, can take the following step. 1 choose twist suitably agglomerate DZ1 twist agglomerate contact Chan Jiang is tall, exterior is stable, successful rate is high. 2 strengthen daily cleanness to because be water twists, maintain, a class comes down to twist for nothing implement in meeting conglutinate a lot of short fine hair, answer everyday a sky twist implement clean two, ensure twist for nothing implement have lubricate amply. 3 strict cycle maintain, improve maintenance quality twist for nothing implement number records his to maintain time, maintain seriously on time, what notice scissors at any time is sharp degree, the effect placing gauze that places gauze piece and unplug the roll such as lid of gauze, antrum wear out condition. 4 transform condole bottle bracket to add water with condole bottle, can assure to twist for nothing implement work for long, need not add water repeatedly, but exorbitant meeting generates support slack circumstance, answer to be adjusted in time. 5 control twist knot speed sky twists implement rate is too rapid, can cause twisting tolerance inadequacy, influence connect sheet is strong, should be in assure to twist the premise of knot quality falls, choose appropriate career. Law of operation of movement of 6 normative operation method writtens guarantee to twisting for nothing head quality is affected very big.
梗概：生产纯绵、麻棉低支竹节纱时，因原纱单强不高，可以在1332M机上用水捻捻结器来接头，为保证接头质量，可采取以下办法。1选用合适的捻结块DZ1型捻结块接头单强高，外型稳定，成功率高。2加强日常清洁保养因为是水捻，一个班下来空捻器里会粘附了许多短绒，天天应把空捻器清洁两次，并确保空捻器有充足的润滑。3严格周期保养，提高维修质量把空捻器编号并记录其保养时间，按时认真保养，随时注重剪刀的锋利度，夹纱块的夹纱效果以及拔纱、腔盖等转动件的磨损情况。4改造吊瓶支架用吊瓶加水，可保证空捻器长时间工作，不用反复加水，但支架过高会产生漏水的情况，应及时调整。5控制捻结速度空捻器的速度过快，会造成加捻气量不足，影响接头单强，应在保证捻结质量的前提下，选择合适的速度。6规范操作方法运转操作法对空捻结头质量影响很大。
10. Solid model is made for mudsill and bracket using I-DEAS, and finite element static analysis is carried out, on the base of terminal conditions setting for the overall struct...
利用I-DEAS软件建立了底梁及支架的实体模型，基于整体结构设定边界条件，定义约束，进行了有限元静力分析计算。
11. The main wall (1a) can rotatablely support on a hinge bracket (6) in a pose that the surface back approximately points to the car width direction and the cover board mounting wall (1b) protrudes out from the upper end of the main wall (1a) to the car width direction.
一种车辆前部结构，铰链臂(1)具有主壁部(1a)和盖板安装壁部(1b)，所述主壁部(1a)以其表背面指向大致车宽方向的姿势可转动地支承在铰链托架(6)上，而所述盖板安装壁部(1b)从主壁部(1a)的上端缘向车宽方向内侧伸出。
12. Then the concrete design is to carry out, which includes the design of reflective surface, the design of PDSs bracket, the design of floater and the design of shaking-absorbed accessory. During the process, there are a series of caculations and emulations. At last, the opto-electronic deflection measurement sensor has been designed and produced.
随后通过对该方案进行具体的零件设计，主要包括反射面的设计，PDS支架的设计，浮子的设计以及减震零件的设计等等，在设计的过程中包含了一些理论计算和仿真，最终设计和制作了光电挠度计。④。
13.
13. This paper discusses the experimental result of a study on a elevator counterweight derailment mechanism and guide rail strengthening method. Full-scale in plane (X-direction) and out-of-plane (Y-direction) load tests on a 5kg guide rail were performed. To verify the effectiveness of different strengthening methods, three types were tested: EPOXY reinforced 5kg rail, shortened bracket distance, and the replacement with 8kg rails.
本文以足尺寸试验，针对容易发生脱轨现象的平衡锤5kg导轨进行研究，分别探讨导靴与导轨受面内、面外力时的互制行为，并分别以EPOXY补强、缩短托架间距、更换8kg导轨等三种可能的改善方法，经由实验评估其优缺点，最后并检讨电梯业界对於导轨受地震力的变形量估计是否适用。
14. In combat mode, the vessel blossoms like a deadly metallic flower, its armored wings spreading out and its pair of double cannons swinging forward to bracket the cockpit module.
它的装甲机翼展开，它的一对双加农炮移动向前支持指令舱。
15. With Greece still feeling the sting of the thrashing they took at the hands of the high-flying Americans, the other question was whether Vassilis Spanoulis and his pals might be willing to sacrifice one game now for a chance to get out of Team USA`s half of the tournament bracket.
现在的希腊队还能隐隐感受到被牛气冲天的美国队狂扁的余痛，但问题是斯潘诺里斯和队友是否愿意输一场，以便能逃出美国队所在的一组。
16. 1This work(the chair which is my production)has the element of zig zag chair by Gerrit Rietveld. when we spread out it, it looks like a one-piece material. the material are all of wood. i continue to use zig zag chair''s base(namely is bracket, also called the legs of chair).the massive material, compact line, both make the chair have a plastic feel. the lines of the back of this chair and the armrest are more soft, at the same time, it increases the cosiness.
急！！！哪位高手帮我翻译一小短介绍？1。这个作品融入了Gerrit Rietveld设计的zig zag chair的元素。把整个椅子摊平就像是一整快材料。材料全部用的是木材。沿用了zig zag chair的底座（就是支架，也可以说是椅子腿）。大块的材料，简洁的线条，使椅子非常有整体感。椅背和扶手的线条更加柔化了，同时增加了舒适度。
17. bracket out是什么意思
17. 6 Appropriate treatments are carried out to prevent the pole, bracket, and lamp holder from oxidation and rustiness.
灯竿、支架、灯头经防氧化、抗腐蚀处理，灯盖采用经专门加工的钢化玻璃。
18. Drawing, and make out the right number in bracket.
找出与立体图相对应的三视图，并在括号内填写相应编号。
19. And make out the right number in each bracket.
找出与立体图相对应的三视图，并在括号内填写相应编号。
20. If make clear ISSN of date of international standard publication only in publication, and date of unified without home publication, or date of two kinds of publication all has, but home is not code name of area of province, municipality, municipality directly under the Central Government at the back of CN of unified publication date give out, bracket is added at the back of CN however or have other letter, show those who register to it is area of Hong Kong, Macao and Taiwan, if this kind of the press sets station of editorial office, reporter or agency inside to have an edition, presswork, issueing an activity also is illegal. 2, format of standard of CN of date of domestic unified publication it with CN prefix, count word and classified date composition by 6, its structure format is CN XX-XXXX/YY, 2 digit word is area size at the back of CN, word of the 4 digit after compose is serial number, size of area of = of the date of i. e. the press that register + serial number, the letter classifies date for books at the back of diagonal, if culture is taught kind for G, medicine is wholesome kind for R.
假如在出版物只注明国际标准刊号ISSN，而没有国内统一刊号，或者两种刊号均有，但国内统一刊号CN后面不是省、自治区、直辖市地区代号给出，而是CN后面加括号或有别的字母，说明它是港澳台地区注册的，这类报刊假如在内地设有编辑部、记者站或办事处进行编辑、印刷、发行活动也是非法的。2、国内统一刊号CN标准格式它以CN前缀，由6位数字和分类号组成，其结构格式为CN XX-XXXX/YY，CN后面2位数字为地区号，缀后4位数字为序号，亦即报刊登记号=地区号+序号，斜线后面字母为图书分类号，如文化教育类为G，医药卫生类为R。